Foiled

Long time, no blog.  I have had a crazy year, which is why I haven’t been online much and I haven’t been crafting too much.  My husband and I decided to get divorced, so we spent the beginning  of the year getting our affairs in order. The divorce was amicable and I'm happier now.  Then I had a roof leak in the beginning of June in my tv/craft room.  The leak wasn’t that bad, but it ruined part of the popcorn ceiling.  So I had to redo the ceiling and that led to repainting the room.  So I was without a craft space for 2 months.  At the same time, I had 2 coolant leaks in my car.   Then I had another leak in the roof that caused the ceiling in the bathroom to collapse.  And now my dog has cancer and I’m driving 2 hours every week for his treatment. 

On the happier end of the spectrum, my Mom and I took an epic trip to Oregon and Seattle for my 40^th birthday.  We went  to Portland, checked out the waterfalls along the Columbia River Gorge, row boated on Clear Lake, went to Crater Lake and drove up the Oregon coast before finishing the trip out in Seattle.  Crater Lake is absolutely amazing.

 

Now to the crafting.  Artsy Inkers is getting ready to have another party – Inktoberfest.  And I’m hosting a challenge for it.  So if you aren’t a member of the board, now is a great time to join.

The challenge is based upon a Plaid product my Mom demonstrated back in the 1990s.  She was a craft demonstrator for Plaid and would demonstrate the products at different craft stores in the areas.  

I’ve been wanted to try it for a card for a while.  Here's the finished card.  

Now here are the step by step photos and instructions.

Step 1 – stamp an image on a piece of acetate.  You will be putting a frame around it eventually, so just make sure the piece is big enough to fit your frame.  I used Staz-On and the image is by Stampendous.

Step 2 – color in the image with a coloring medium that will be translucent.  I used my Copic markers.  Because Staz-On and Copic markers are both alcohol based, I colored the reverse side.  Otherwise, the markers would have removed the stamped image. 

Step 3 – this is the tedious step.  You need to use something that will be opaque to color around the stamped image.  I used a metallic acrylic paint.  You need to color everywhere except your stamped image.  Do the painting on the reverse side.  Make sure you don’t paint where you colored.  You want the stamped image to be translucent.  It will probably take several layers to get it opaque.  Just let it dry between layers.  It took me about 4 or 5 layers to get it fully colored. 

Layer 1 

Finished 

Step 4 – lightly crumple a piece of tin foil.  It should be smaller than the frame.  You are going to attach the tin foil behind the image.  It will show through in the areas that are translucent but not where they are opaque. 

Step 5 – make a frame and attach your image to the frame.

I die cut the scalloped oval and used a regular oval to make the frame.  I used next size down of scalloped ovals to trim down the image and the piece of foil.  I cut another of the larger scalloped ovals from a scrap piece to be the back of the sandwich I created.

Step 6 - Attach the image to the back of the frame.

Step 7 -  lay the foil down.  Don't use any glue at this point because you don't want it interfering with the effect.

Step 8 - Glue the scrap large scallop oval to the oval frame and tin foil.  I forgot to take a picture of this step.

Here is what the finished piece looks like.

Here are a couple of close-ups to better show the tin foil behind the image.

And here is one more of the finished card.  I embossed the base with a Sizzix (?) embossing folder.  The ribbon was from my stash. I used by bow-it-all to make the bow.  I made the little poinsettia using a new Spellbinders die.  I added liquid pearls for the center. 

Instead of making a floating image, you can just die cut a piece of cardstock that is the same size as your card.  That is what I did with the first card I made using this technique.  Here is that card.

The image is by Power Poppy and I colored it with Copics.

Thanks for stopping by and please come again.  

Christmas Z-Fold Card Insanity (Project 48)

Warning: this will be a really long post with lots of pictures and detailed descriptions of one card.

As promised, here is the second Z-fold card I made. And this was one of those ideas that sounded really good in my head and then about 1/3 of the way through, I realized that it was actually insane. I think I spent about 10 + hours making this card. And I'm not sure if I'm going to give it away or keep it for myself. I'm just not sure I like anyone I like enough to give this too. :-) I'm either going to put it out with my Christmas decorations or maybe add some squirrels and give it to my mom since she puts all the cards I've made for her over the years out with her Christmas decorations.

I started by drawing a triangle on each section to create a base shape for the tree. Since I improvised on the z-fold cut to make my tree base and insure that the whole tree lines up when the card is folded, I've included at the bottom of the posts photos and an explanation of how I did it.

Since I was going to use die cut pine needles to create the tree, I knew there would be gaps. So I used painter's tape to mark off the partial triangle on the front section and inked it with Distress Ink in Mowed Lawn and, what else, Pine Needles. I wished I had taken some pics while I was doing this.

 I die cut the pine needles from snippets of watercolor cardstock. It is an Impression Obsession die.  Then I colored them with Distress Ink in Mowed Lawn and Pine Needles. I know it would have been faster to color the paper first and die cut second but then the sides would still be white, which would have bugged me. I have slight crafting OCD tendencies. Then began the epic assembly process by attaching each one individually. Here's a pic of what the individual pine needles look like, with a dime for some perspective on the size. For non-Americans, a dime is about 1.8cm in diameter.

 

The trunk is a piece of brown floral tape attached at the top (before I added the pine needles). The bottom 2 rows of each section were attached with glossy accents and the rest were attached with rolled pieces of scor-tape to give some dimension.  There are 43 pine needle branches on the front section.

I couldn't decide if I liked the full sun or in the shade photos better, so included both.  For the garlanded, I attached pieces of ribbon that I folded the edges under the pine needles to give the illusion of it wrapping around the tree.  

 

Here's the middle section, with the front folded back, so you see the middle section and the bottom section.  There are 54 pine needle branches on the middle section.

 

And the full sun picture.

Here it is with the whole card unfolded.  This is the back of the card.  For the sentiment, I die cut the red and white cardstock with Spellbinders' nesties.  It is one of the label sets but I forget which one.  The sentiment is by Impression Obsession. I stamped with ColorBox Pigment ink in Evergreen and since it usually takes forever to dry, I heat embossed it with clear embossing powder.  I realized when I went to attach it that it was a little to big for the section, so I had to attach it at a wonky angle to fit.  I added a couple of gems.  I think that was because I smudged some ink on the white cardstock. 

 

Here's just the middle by itself.  I realized as I was drafting this, I didn't have a pic of just the middle without the bottom layer showing, so I took another pic but by that time the sun was hiding.

Now for the bottom section (the inside of the card), which had the full tree on it.  The star on top of the tree is a die by My Favorite Things colored with metallic watercolor paint and with a gem at the center.  And this section has 69 pine needle branches.  So that's 166 individually colored and attached pine needle branches. Yep, I'm a little crazy. In full sun:

 

 

And in the shade.  I added a dime to give perspective on the ornaments.  

 

The ornaments are My Favorite Thing stamps. I used the pieces of cardstock cut off from the card base for stamping them. The first batch I stamped with Versafine. Since I didn't stamp nearly enough the first time, I stamped the second batch with Versafine and embossed with clear embossing powder, because after I colored the first batch, the lines on some of the ornaments didn't show up as well. On some of them I embossed a snowflake with clear embossing powder. It was part of a three snowflake stamp also by My Favorite Things that I did surgery on. I colored them all with metallic water colors, added glossy accents, cut each out and attached with rolled pieces of scor-tape. I also added sequins with a dot of Stickles in the middle and gems for sparkle. This close-up (of the bottom section) shows the ornaments better.

 

 

You can really see the sparkle in the full sun one. Again this is the bottom section. 

 

When I attached the trunk, I only adhered the top down because I wanted to be able to tuck the ribbon for the tree skirt under the trunk so that it would look like the tree skirt went around the whole trunk.  It took a bit of trial and error to get the tree skirt to work.  I used a snippet of wired ribbon to create the skirt, tucking it behind the trunk and then folded over the top. The presents are My Favorite Things stamp, except the gold one, which is Hero Arts.  I stamped all but the far left one on snippets of pattern paper, embossed, used the watercolor metallic paint for the ribbons and fussy cut. The far left one was stamped on snippets of plain white cardstock and painted with metallic paints.    

In this close-up of the front section, you can see that I got better at attaching the tree skirt as I went along.  The presents were a strategic choice to hide the worst of the lumps.

 

Here is the card fully open to show the inside.  The inside sentiment is by Stampendous.  Oh and the green pattern paper on the 2 non-tree panels were snippets as well.

 

Full Sun



 

 

Partial Shade

 

 

Since this card is literally covered with snippets, I'm going to share it over at the playground.

 

Pixie's Snippets Playground Weeks 181 and 182

 

Thanks for stopping by and please come again. 

 

Now for the detailed directions for creating the card base, which I figured I would put at the bottom so you didn't have to read through/ scroll through them to get to the good stuff, but you could look if you were interested.

 

For the Z-fold you need a piece of cardstock that is 6 inches by 12 inches (15.3 cm by 30.6 cm - I think I have conversions right).  I used a scrap piece for these pics because I forgot to take pics while I was making it and the piece was only 5.75 inches by 12 so if it looks a little off that’s why.  Here's a picture on the starting piece with all the measurements on it.  They will be explained in steps 1-3.

 

1) You are going to measure up 3 inches (7.6 cm) on one side and draw a diagonal line to the opposite corner.  That is your usual cut line for a z-fold line. 

 

2) Flip the paper over and draw the diagonal line again, making sure you measure up the 3 inches on the same side that you did on the front. This will give you a guide line for the middle section, which when the card is folded is actually the back of the piece of paper.

 

 

 3)  Then score at 4 inches (10.1 cm) and 8 inches (20.2 cm) across.  These are your fold lines.  That way each section is 4 inches wide.  Here’s a pic of the front with all the measurements and the diagonal cut line draw in.

 

4) Fold you card at the 4 and 8 inch score lines to make your Z. 

5) Now, on the front panel, find the center point of the top and draw a triangle with a ruler.  I also added the trunk and line for the tree skirt. The diagonal line is the cut line.  The straight line is showing that it is 4 inches wide.

 

 

 

 

6) Now cut just the front section along the cut line and then up the folded edge to the top.  That way you can see the middle section when the card is folded.

 

 

7) Line the ruler up using the edge of the tree on the front section to draw the top of the tree on the middle section.

 

 

 

8) Then on the front panel measure up from the bottom of the card to the bottom of the tree. 

9) Use that measurement to draw the bottom line of the tree on the middle section. 

 

 

10) Then connect the bottom of the tree to the top part you already drew. 

 

 

11) Again, cut along the cut line (for the middle section this time) and the fold.  This is where drawing the cut line on the back comes in handy.  Now you can see the bottom section when the card is folded.

 

 

 

12) Repeat steps 8 to 10 for the back section.  When you go to cut this time, cut along the cut line until you get to the tree top.  Then cut up the tree top then down the other side to the cut line, across the cut line to the fold and then up the fold.  Now you have a tree base.  

 

 

 

 

 



 

 

 

 

Now you too can join my insanity.  And I did warning at the beginning this would be a long one.  So thanks for hanging in there for all my long drawn out explanations. 

A Couple More AIR 15 Cards (Projects 46 & 47)

Even though AIR 15 if over, I’ve got a couple of more projects from AIR15 to share with you. 

The first card involves a z-fold.  Here is a link to the FarNorth’s blog posting with instructions on how to do a z-fold.  Here's a pic where you can see the z of the fold.

I decided that I wanted to create a scene that went across all three layers and I went with a beach scene.    Instead of cutting along the diagonal, I drew a line on both sides of the paper so I could use that as a guide for stamping.  Then I fussy cut the top part off so that instead of having a straight line.

 

The front panel is the ocean. I stamped the waves with Versamark and heat embossed with clear embossing powder. Then I stamped the fish with Versafine.  I added the bubbles, stamped with Versamark and heat embossed with clear embossing powder.  I inked around the fish with Distress Ink in Salty Ocean. I colored the fish with Squeezed Lemonade, Mowed Lawn, Picked Raspberry, and Dried Marigold.  I went back and stamped in some waves with Salty Ocean and the seahorse with Picked Raspberry.  The waves and fish with bubbles are by Studio G.  The other fish, bubbles and seahorse are by Fiskar.  I fussy cut along the top waves.

 

I did the same scene on the back, except I forgot to stamp the fish before adding the Salty Ocean background.

 

 

Center panel is the beach. I stamped the shells across the top with a variety of ColorBox pigment ink and then embossed with clear embossing powder. Then I inked the beach with Squeezed Lemonade and Antique Linen and then flecked Vintage Photo. I meant to stamp the shells on the body of the beach before coloring the beach but I forgot so I did it after and embossed them. I added a little bit of the ocean at the bottom.

I did the same scene on the back of the center panel.

Back panel is the sky. I stamped the birds and palm tree using Colorbox pigment ink and embossed with clear embossing powder.  I also stamped and embossed the waves. Then I inked the sky with Tumbled Glass and Salty Ocean, the sand and ocean the same as the other layers. I added a beachy sentiment. All the stamps are by Inkadinkado.

 

Here's a picture of it completely open.

 

And here's what it looks like closed.

 

This next card combines 3 of the challenges in this card.  The first is the paint background, which I described in previous posts.  The second was the digital stamp challenge.  The host’s husband converted a piece of his art into a digital stamp for us to use for the challenge.  Isn’t she lovely?  And the final was the mistakes challenge, which is going to take some explaining.  One of the members of Artsy Inkers hosts a Bingo challenge during every party.  Before the party starts, she posts a list 25 words.  If you want to play along, you pick a 10 of the words and message her your list.  Then each day of the party, she posts 3 of the words from the list of 25.  The first person to have all 10 of their words posts and post BINGO, wins.  This time around, she picked a list of common mistakes made in stamping.  So for her challenge, you had to incorporate at least 2 of the mistakes on the list into your project, but not cover them up.  Personally, I think this challenge was a bit of a jinx because I ended up making several mistakes on this project, none of them intentional.   



 

Here is the list of my mistakes:

Mistake 1 - technique gone wrong - I intended to print the digi stamp and cut it on a lace scallop rectangle with my silhouette. Well the cut file was for a frame and I forgot to remove the inner cut lines and ended up with a frame and the image on a plain rectangle.

 Mistake 2 - torn paper - the silhouette ripped one of the scallops, so I ripped a bunch more so that it looks like the scallops frayed in the wind blowing the girls hair.

 Mistake 3 & 4 - blurred images and partially stamped image - the stamping of the background did not go so well.

 

 Mistake 5 - warped card stock - the paint warped the card stock.

 

You can see the mistakes better in this closer cropped picture.

 

I colored the image with Copics (I forgot to write down which ones, but I think it was YG03, YG06 and YG09 and then BG45, lips are RV10 and the eye is B02????) and went with making her a fairy. And I added some die cut flower to her hair with liquid pearl centers.

The background stamp is by Impression Obsession and I did the paint technique with metallic blue and purple paints.

I've got one more AIR 15 card to share but it deserves it's own blog post.  So I will post that one later this week.

 

Thanks for stopping by and please come again.